Cisco 640-822 Guide Provider, 50% Discount Cisco 640-822 Exam Questions Vce On Our Store

Welcome to download the newest Pass4itsure eada10 VCE dumps: http://www.pass4itsure.com/eada10.html

GOOD NEWS: All the new Cisco 640-822 exam questions and answers can get in VCE and PDF format for free on Flydumps.com With Flydumps Cisco 640-822 practice tests, you will pass the exam easily! Free download Cisco 640-822 exam questions vce player all the time.

QUESTION 44
As a network administrator, you should be familiar with various commands. Look at the following options carefully. By virtue of which router command, you can determine the Serial 0/0’s status?
A. show s0/0 status
B. show interfaces
C. showip route
D. show version
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 45
As a network administrator, you should be familiar with various commands. The Cisco IOS software version runs on a router. Do you know which commands can be used to show information about this software version? (Select three.)
A. show running-config
B. show IOS
C. show version
D. show flash
Correct Answer: ACD Section: (none)Explanation
Explanation/Reference:
QUESTION 46
The “shutdown” interface configuration command can be used to shut down the serial 0 interface manually when you are logging into a router. Then, the serial 0 interface will turn into another status after you enter the “show interface serial 0” command in exec mode. Do you know what the status will be?
A. Serial 0 is up, line protocol is up
B. Serial 0 is administratively down, line protocol is down.
C. Serial 0 is down, line protocol is up
D. Serial 0 is down, line protocol is down
Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 47

A. The IOS software loaded on the router is outdated.
B. The interface type does not exist on this router platform.
C. The interface was already configured.
D. The command was entered from the wrong prompt.

Correct Answer: B Section: (none)Explanation
Explanation/Reference:
QUESTION 48
During your interview for the network administrator position, you are asked the following question. You can also gain information from the given exhibit. After having been added to the network, Host B still has to get an IP address. Please point out two possible addresses that will not prevent host B from communicating with other devices in the network. (Select two.)

A. 192.168.10.49
B. 192.168.10.38
C. 192.168.10.46
D. 192.168.10.47

Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 49
As a CCNA candidate, it is necessary for you to know the calculation of the subnet address. Here, if the IP address is 172.19.20.23/28, please identify its subnet address.
A. 172.19.20.15
B. 172.19.20.0
C. 172.19.20.16
D. 172.19.20.32
Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 50
Look at the following exhibit carefully. You can know that a file is being sent to Host A by FTP Server. B displays the frame as it leaves the RB router. According to the given information, can you point out the layer 2 destination address of the frame by the time?

A. abcd.2246.0035
B. aabb.5555.2222
C. abcd.1123.0045
D. abcd.4444.0012

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 51
Suppose that you are a network administrator working in Company. Look al the following exhibit carefully. The server is connected to the RB router. Recently, users on the RA LAN complain that they cannot access this server. In order to solve this problem, you have to take some measures. Please choose two correct actions from the options listed below. (Select two.)

A. Enter the configuration mode for interface fastethernet0/0.
B. Enter the configuration mode for interface serial0/0
C. Issue the no shutdown command.
D. Issue the enable command.

Correct Answer: BC Section: (none)Explanation
Explanation/Reference:
QUESTION 52
Study the following exhibit carefully. You are a network technician working in Company. One time, you fall in your attempt to ping from RA to RB. You know that you can solve this problem by virtue the show interfaces serial0/1 command. What actions will you take?

A. Reseat the serial connectors on the RA and RB routers.
B. Replace the serial cable between RA and RB.
C. Configure the serial0/1 interface on RB with the no shutdown command.
D. Configure the serial0/1 interface on RA with theip address 192.1.1.7 255.255.255.252 command.

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 53
Look at the following exhibit displaying the topology and partial configurations carefully. As a newly-employed administrator, you are not skillful at your regular work. One day, after finishing configuring the A and B routers, you fail in your attempt to ping B from the A router. In order to solve this problem, you can utilize some command. Choose the correct command or set of commands that can help you reach the goal.

A. B(config)# interface s0/0 B (config-if)# ip address 10.1.1.5 255.255.255.252 A (config)# ip host B 10.1.1.5
B. B (config)# interface s0/0 B # (config-if)# no shut
C. B (config)# line vty 0 4 B (config)# login B (config)# password B
D. B (config)# interface s0/0 B (config-if)# cdp enable

Correct Answer: A Section: (none) Explanation
Explanation/Reference:

Flydumps.com delivers you the best possible study guide which is also updated regularly to take your Cisco 640-822 exam. The Cisco 640-822 real exam is planned and researched by IT experts who are very much involved in the IT field.They have been trying their level best to create concise and logical study guide by using their data. Using the product of Flydumps.com will not only help you pass the exam but also safe a bright future for you ahead.

Pass4itsure eada10 dumps with PDF + Premium VCE + VCE Simulator: http://www.pass4itsure.com/eada10.html

Cisco 640-822 Guide Provider, 50% Discount Cisco 640-822 Exam Questions Vce On Our Store