Cisco 200-155 dumps? “Introducing Cisco Data Center Technologies” is the name of Cisco 200-155 exam dumps which covers all the knowledge points of the real Cisco exam. Money back guarantee Cisco 200-155 dumps CCNA Data Center exam answers material youtube download is your best choice. Pass4itsure Cisco 200-155 dumps exam questions answers are updated (85 Q&As) are verified by experts.
The associated certifications of 200-155 dumps is CCNA Data Center. In this competitive Introducing Cisco Data Center Technologies exam environment, everyone is struggling hard to achieve maximum skills and knowledge in Cisco https://www.pass4itsure.com/200-155.html dumps practice test to surpass others in qualities and skills.
Exam Code: 200-155
Exam Name: Introducing Cisco Data Center Technologies
[100% Pass Cisco 200-155 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWNHFtR0VqbXVEeUU
[100% Pass Cisco 210-260 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg
A customer’s network consists of a data center with an Interceptor appliance and a Steelhead appliance cluster and several remote sites each with Steelhead appliances. You would like to pass-through an application unoptimized due to a suspected problem and are provided the following information:
The application uses a static TCP port, 15000. The application is initiated from the remote site machines. The same servers which host the application host several other applications as well. Based on the information provided which option will allow the application to pass-through:
A. Configure in-path rules on the Interceptor appliance to pass-through destination TCP port 15000
B. Configure in-path rules on the data center Steelhead appliances to pass-through the server IP addresses
C. Configure a peering rule on the Interceptor appliance to pass-through destination TCP port 15000
D. Configure a load-balancing rule on the Interceptor appliance to pass-through destination TCP port 15000
E. Stop the Interceptor appliance service
200-155 exam Correct Answer: D
A firewall at a remote site on the WAN side of Steelhead appliance (A) is stripping out the 76 and 78 values in the TCP options field. Steelhead appliance (B) is in the local cluster of appliances communicating with an Interceptor appliance. The desired result is for optimization to continue between Steelhead appliance (A) and Steelhead appliance (B) for all traffic originating from the remote site. A suggestion is made to use fixed target rule(s) to meet this objective. Based on the information provided select the best answer from the choices below:
A. On Steelhead appliance (A) configure a fixed-target rule to the Interceptor in-path address
B. On Steelhead appliance (A) configure a fixed target rule to the Interceptor in-path address with Steelhead appliance (B) as the backup target.
C. On Steelhead appliance (A) configure a fixed target rule to the Steelhead appliance (B) in- path address
D. Fixed target rules will not work with Steelhead appliances virtually out of path and communicating with Interceptors
E. TCP option 76 or 78 are not relevant when an Interceptor appliance is used, Peer Affinity will automatically achieve this objective
Correct Answer: C
A customer would like to deploy the Interceptor appliance on four aggregated 100 Mbps links which use LACP to bundle the physical links into a single logical link. Which of the following is true? (Select 2)
A. LACP is not supported with the Interceptor appliance
B. The command “in-path multi-interface enable” must be configured
C. The same IP address must be configured on each of the four in-path interfaces
D. Each In-path interface should have its own unique IP address.
E. The command “no arp filter response” should be enabled.
200-155 dumps Correct Answer: DE
In a quad Interceptor appliance deployment the directly connected pairs are configured in failover mode:
IC-A & IC-B are failover buddies
IC-C & IC-D are failover buddies
To prevent asymmetric routing IC-A should be configured to have a neighbor relationship with which of the following peer Interceptors? (Select 2)
D. Interceptor appliance uses auto discovery to learn about each other
E. Neighbor relationships are unnecessary in a quad Interceptor appliance deployment
Correct Answer: BC
The primary data center Interceptor is configured to fail-to-block. What best describes the result of stopping the Interceptor appliance service?
A. All traffic passes through the Interceptor appliance
B. The Interceptor allows UDP traffic to pass-through, but blocks all TCP traffic
C. Previously optimized connections continue to be redirected, but new TCP connections are passed through
D. All traffic through the Interceptor will be blocked
E. The Interceptor appliance communicates to the Steelhead appliances to disable their optimization service
200-155 pdf Correct Answer: D
Which statements are true regarding the default methods by which load-balancing takes place in the Interceptor appliance. (Select 2)
A. The Interceptor appliance uses round robin, for each TCP connection, regardless of source or destination IP address, and is equally load-balanced between a group of Steelhead appliances
B. The Interceptor appliance uses round robin, for each TCP connection, depending on source IP address, and is equally load-balanced between a group of Steelhead appliances
C. The Interceptor appliance uses hash assignment, for each TCP connection depending the hash value calculated from source and destination IP address, and is directed to a particular Steelhead appliance in the local cluster
D. The Interceptor appliance can dynamically determine and direct traffic for optimization to the least loaded Steelhead appliances based on Steelhead appliance resource usage
E. The Interceptor appliance uses peer affinity, a Steelhead appliance in the local cluster that has been previously paired with a destination IP address is preferred
F. The Interceptor appliance uses peer affinity, a Steelhead appliance in the local cluster that has been previously paired with a remote Steelhead appliance is preferred
Correct Answer: DF
Which statement is true regarding “fair-peering”?
A. It is a default parameter
B. It enables load distributed using round-robin
C. It enables load distribution using peer affinity
D. It can be configured as part of a load-balancing rule
E. It automatically redistributes connections equally among all appliances in a cluster when a new appliance is added to the local cluster
200-155 vce Correct Answer: D
Using an Interceptor appliance is an alternative to what network designs? (Select 2)
C. Connection Forwarding
D. Fixed-target rules
E. Peering rules
Correct Answer: AB
New Cisco 200-155 dumps questions and new programming patterns are being evolved Cisco https://www.pass4itsure.com/200-155.html dumps. Even Cisco certified professionals require upgrading themselves.
Read More Youtube:https://youtu.be/we3j96ptWco